Operating sequence, Load the laundry, Measure out the detergent and the fabric softener – Zanussi FS 1555 W User Manual

Page 9: Select the required programme, Select the spin speed or option or

Advertising
background image

9

Operating Sequence

Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment

of

the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 60°C, without any laundry in
the machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.

WASHING 5 KG OF WHITE COTTON AT 95°C

Suppose you have 5 kg of heavy soiled laundry to wash.
It is white cotton and is suitable for high temperature
washing.

1. Load the laundry

Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.

2. Measure out the detergent

and the fabric softener

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it
into the main wash compartment

and into the

compartment marked

.

If required, pour fabric softener into the compartment
marked

(the amount used must not exceed the

“MAX” mark in the drawer). Close the drawer gently.

P0877

P0876

P0004

3. Select the required programme

Turn the programme selector dial to the

programme.

The light START/PAUSE starts to flash.

4. Select the spin speed or

option or

Turn the selector dial to the required position.

90

0

500

1500

70

0

E

132991630.qxd 10/07/2003 10:10 Pagina 9 (Nero/Process Black pellicola)

Advertising