Zephyr CTP-E 60SX - Manual (Page 14)

12
In
s
ta
lla
ti
o
n
-
M
o
u
n
ti
n
g
th
e
H
o
o
d
1. Mount motor housing to the range hood body using (10) 1/2” self tapping screws.
2. Determine height of hood, measure and select either 27 3/8” or 35 3/8” angle brac kets and attach (4) of
them to the motor housing using (8) 1/2” self tapping screws (2) for each angle bracket.
3. Slide duct covers over motor housing. Make sure bottom duct cover with cut-out is facing the front and back of
the hood.
www.zephyronline.com