Installation instructions technical specifications – Zanussi FLA 1001 W User Manual
Page 23
23
Installation Instructions
Technical Specifications
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Should the appliance power supply cable need to
be replaced, this should be carried out by our
Service Force Centre.
DIMENSIONS
Height
85 cm (33.5”)
Width
60 cm (23.6”)
Depth
54 cm (21.1”)
POWER SUPPLY VOLTAGE
230-240 V/50 Hz
TOTAL POWER ABSORBED
2050 W (10A)
Minimum (hot)
0.35 bar (3.5 N/cm
2
)
WATER PRESSURE
Minimum
0.48 bar (4.8 N/cm
2
)
Maximum
7.6 bar (76 N/cm
2
)
MAXIMUM RECOMMENDED LOAD
Cotton, linen
5 kg (11 lbs)
Synthetics
2 kg (4.5 lbs)
Delicate fabrics
2 kg (4.5 lbs)
Wool
1 kg (2.2 lbs)
SPIN SPEED
Maximum
1000 rpm (FLA 1001 W)
1100 rpm (FLA 1101 W)
1200 rpm (FLA 1201 W)
CONSUMPTION DATA FOR WASHING
Energy
1.03 kWh
4.5 KG NORMALLY SOILED COTTON
Water
54 litres
ITEMS AT 60°C (PROGR. C) WITH COLD
WATER FILLING
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
132998431.qxd 11/29/01 9:00 AM Pagina 23 (Nero/Process Black pellicola)