Yamaha 396 - Manual (Page 10)

E-
8
For Control of This Unit
1
STANDBY/ON
Press this key to turn on this unit or turn it into the
standby mode.
This key can be used only when the POWER switch on
the main unit is set in the ON position.
Standby mode
In this state, this unit consumes a very small
quantity of power to receive infrared-signals from
the remote control.
2
Input selector keys
Press a key to select the input source.
3
VOLUME +/–
Press these keys to increase or decrease the volume.
For Control of Other Components
Note
The functions of the keys to control other YAMAHA
components are the same as the corresponding keys on
those components. Refer to those components’
instruction manuals for details.
1
Tape deck keys
These keys control tape decks.
* DIR A, B and A/B apply only to double cassette tape
decks.
* Pressing DIR A will reverse the tape direction on a
single cassette tape deck with the automatic reverse
function.
2
CD player keys
These keys control compact disc players.
* DISC SKIP is used for disc changers only.
3
Tuner keys
These keys control tuners.
PRESET +: Press this key to select the next preset
station number.
PRESET –: Press this key to select the previous
preset station number.
A/B/C/D/E: Press this key to select the group (A – E)
of preset station numbers.
REMOTE CONTROL
The remote control is designed to control the most commonly used functions of the main unit. If you have a YAMAHA CD
player, tuner, tape deck, etc. with remote control compatibility, this remote control will also control their various functions.
CD/DVD TAPE MD
TUNER PHONO AUX
+ –
A/B/C/D/E
DECK A/B
DIR B DIR A
TAPE
DISC SKIP
CD
STANDBY/ON
PRESET + –
TUNER
VOLUME
2
3
1 1
2
3
1