Zanussi F 1203 W - Manual (Page 6)

1 Detergent dispenser drawer
and Programme guide
2 On/Off button
By depressing this button the machine starts operating.
When depressed again, the machine stops.
3 Mains-on light
This light illuminates when the machine starts working
and goes out when the ON/OFF button is released.
4 QUICK WASH Button
By depressing this button on programmes A, B, C, D
and H the wash time is reduced.
This is suitable only for garments which are lightly
soiled.
6
The Control Panel
5 RINSE HOLD button
Press this button to make the machine stop with water
in the drum after the cotton, synthetic or delicate wash
cycles.
This prevents any creasing which may occur if the
clothes are left damp in the drum. When it is
convenient for you to empty the machine, simply press
this button again so that the machine can proceed to
drain and spin, or turn the dial to the drain programme
“P”.
If this button is not activated, the washing programmes
will end with a spin.
6 HALF LOAD button
Select this button to reduce water consumption on the
rinse cycle when washing a smaller load of cottons or
linens (maximum load size = 2.25 kg).
7 Programme selector dial
Turn the dial clockwise to select the required wash
programme.
Before setting the dial to any position the machine must
be switched off by depressing the ON/OFF button
again.
F 1203 W
ON-OFF HALF
LOAD
PROGRAMME
Z ANUSSI Q UALITY
RINSE
HOLD
QUICK
WASH
AQUACYCLE 1200
A
SHORT SPIN
WHITES + PREWASH
WHITES
FAST COLOUREDS
NON FAST COLOUREDS
HAND RINSES
LONG SPIN
D
C
B
F
G
MIXED FABRICS
WOOL CARE
DELICATES
FRESHEN UP
WORN ONCE
H
L
M
J
N
K
DRAIN P
2 3 4 1 6 7 5
132991210.qxd 29/07/2003 16:15 Pagina 6 (Nero/Process Black pellicola)