X10 Wireless Technology IR19A - Manual (Page 4)

7 6
Setup Button Functions (cont.)
DVD Functions
SCAN+ and SCAN- control fast forward and reverse.
CHAPTER+ and CHAPTER- locate chapters or tracks
on a disc.
LAST (REPEAT) performs “A-B Repeat” (or RPT A.B)
for repeat play of current chapter or track.
INFO brings up DVD Display or Control Menu for
chapter/track/title number, time remaining/elapsed
indication, system information, etc.
MENU brings up the DVD disk menu screen; use with
UP, DOWN, LEFT, and RIGHT.
OK is used for on-screen Menu selection.
SUBTITLE (CC) Turns subtitles on or off.
EXIT Exit on-screen menus and/or return to previous on-
screen selection.
Note: Not all DVD Players support all functions de-
scribed above. Your remote operates most (but not all)
models and brands of infrared (IR) controlled video
equipment. This remote might provide functions not
available on your equipment. Some functions (like
menus) might not be controlled by this remote. In such
cases, use the original remote control for your equip-
ment.
SAT Functions
GUIDE displays on-screen Satellite Channel Guide.
CHAPTER+ and CHAPTER- perform the “Page+” and
“Page-” function for on-screen guide menus used by
some satellite systems.
INFO brings up Satellite Display screen for current
channel and system information.
MENU brings up the Satellite Menu screen; use with the
UP, DOWN, LEFT, and RIGHT navigation buttons.
OK is used for on-screen menu selection.
EXIT is used to exit or clear on-screen menu displays.
Battery Installation
1. On the back of the remote,
push down on the tab and lift
the cover off.
2. Match the batteries to the +
and - marks inside the battery
case, then insert 2 AAA
Alkaline batteries.
3. Press the battery cover back
into place.
+
+
-
-
A
A
A
A
A
A
Battery Saver
Your remote automatically turns off if the buttons are
depressed more than 30 seconds. This will save your
batteries should your remote get stuck in a place where
the buttons remain depressed (e.g., or for instance,
between the sofa cushions).
Code Saver
Codes are stored in permanent memory while you are
changing batteries so that you will not lose any codes
stored in the remote while you are changing batteries.
Power-On Default
The remote powers on in TV mode.
Code Setup
Please refer to “Code Search” on p. 8 for more informa-
tion using the code search feature to learn how to search
through the library of codes for your products.
Note: You can store any kind of code under any mode
(except TV). You can store a VCR code under the CBL
button, or a DVD code under the VCR button, etc.
However, you can only store TV codes under the TV
button.