ZyXEL Communications 2000W - Manual (Page 17)

Prestige 2000W Quick Start Guide
17
4 Phonebook
Use the phonebook feature to store telephone numbers.
4.1 Calling Methods
There are two ways the Prestige can dial a telephone number; either by using the SIP proxy server or an IP
address.
Select Proxy to have the SIP server make the connection. The SIP proxy server assigns the telephone
number or ITSP and therefore you can leave this field blank.
Select P2P to an IP address to place a call without first going through the SIP proxy server. This is called an
IP to IP (or peer to peer) call. You need to enter the IP address of the callee or another SIP proxy server and
the callee’s telephone number in the Prestige’s phonebook.
4.2 Adding a Phonebook Entry
Use the following instructions to add an entry to your phonebook.
Note: Only enter the IP address when there is no SIP proxy server and/or you want to place a
direct IP to IP call. Otherwise the telephone number is sufficient to make your call .
6 Select User Pwd.
1. Phone Number
2. Username
Select Back
7 Clear the password and enter yours.
8 Return to the main screen. The Prestige restarts. User Pwd
*************
Ok Aa1@ Clear
3. User Pwd
VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560