Yamaha DSP-A492 - Manual (Page 22)

22
9
Adjust the sound output levels of the center speaker
and the rear speakers so that they become almost as
same as that of the main speakers.
a) Press once or more so that “CENTER” or “REAR”
appears on the display.
* Select “CENTER” to adjust the output level of the
center speaker, and select “REAR” to adjust the
output level of the rear speakers.
b) Adjust its level.
* Pressing the + side raises and the – side lowers the
level.
10
Cancel the test tone.
Notes
● Once you have completed these adjustments, you can
adjust whole sound level on your audio system by using
the VOLUME control (or the VOLUME keys on the remote
control transmitter) only.
● If you use external power amplifiers, you may also use
their volume controls to achieve proper balance.
● In step 9, if the center channel mode is in the
“PHANTOM” position, the sound output level of the center
speaker cannot be adjusted. This is because in this
mode, the center sound is automatically output from the
left and right main speakers.
< U.K. and Europe models only >
● If there is insufficient sound output from the center and
rear speakers, you may decrease the main speaker
output level by setting the MAIN LEVEL switch on the
rear panel to “–10 dB”.
10
9
10
9
TIME/
LEVEL – +
DSP-A492 DSP-A592
DELAY/CENTER
/REAR
DELAY/CENTER
/REAR/SWFR
Disappears.
TEST
REC/PAUSE DIR B DIR A PLAY
DISC
POWER VOLUME
PLAY
PRESET A/B/C/D/E – +
TIME/
LEVEL TEST EFFECT
PROGRAM PROLOGIC ENHANCED
– +
SLEEP
TAPE A/B
ON/OFF
TUNER
CD
PHONO
DELAY/CENTER
/REAR/SWFR
2CH/6CH TV/DBS VCR V–AUX DVD/LD
REC/PAUSE DIR B DIR A PLAY
DISC
POWER VOLUME
PLAY
PRESET A/B/C/D/E – +
TIME/
LEVEL TEST EFFECT
PROGRAM PROLOGIC ENHANCED
– +
SLEEP
TAPE A/B
ON/OFF
TUNER
CD
PHONO
DELAY/CENTER
/REAR
DVD/LD VCR TV/DBS
DSP-A492 DSP-A592