Yamakawa M2150 User Manual
Page 15
Operation
-When the unit is in CD/MP3 mode, it will switch to radio mode temporarily.
-If the volume level was under the threshold point, it will be raised to the
threshold point.
-When TP station is received, TP segment is turned on in LCD display.
7. PTY function (PROGRAM TYPE)
PTY MUSIC---PTY SPEECH---PTY OFF
While selecting PTY type, its selection is implemented by preset buttons
as described in preset key. When PTY is selected, the radio starts to search
corresponding PTY information, and stops if the corresponding PTY
information is detected.
8. DISPLAY (DISP)
When this button is pressed it is operated as the conversion of each
display mode as follow.
1) In case of receiving RDS station
RADIO
MODE PS---CT---FREQ---PTY
CD/MP3 PLAYER MODE
CDP---CT---PS---FREQ---PTY
2) In case of receiving NON RDS station
RADIO
MODE CLOCK---FREQ---NO
PTY
CD/MP3 PLAYER MODE
CDP---CT---FREQ---NO PTY
Each display time is several seconds, and come back to 1
st
position after
several seconds.
CT=clock
time
FREQ=frequency
15