ZyXEL Communications Prestige 645R - Manual (Page 87)

Prestige P645 ADSL Internet Access Router
IPX Configuration 6-5
6.4 LAN-to-LAN Application with Novell IPX
A typical LAN-to-LAN application is to use your Prestige 645R to call from a branch office to the
corporate headquarters to enable the stations in the branch office to access the NetWare servers at the
headquarters, as depicted in the figure below.
Figure 6-4 LAN-to-LAN Application with Novell IPX
6.4.1 IPX Remote Node Setup
Follow the procedure in Chapter 5 to configure the protocol-independent parameters in Menu 11.1 -
Remote Node Profile. For the IPX-specific parameters in Menu 11.3 - Remote Node Network Layer
Options follow the instructions below.