Zanussi ZWF 1451W - Manual (Page 13)

13
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 90°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 6 KG
Suppose you have 6 kg of laundry to wash.
1. Load the laundry
Open the door by carefully pulling the door handle
outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it
into the main wash compartment
and, if you wish to
carry out the prewash phase,
pour it into the compartment marked
.
If required, pour fabric softener into
the compartment marked
(the amount used must not
exceed the “MAX” mark in the drawer). Close the
drawer gently.
P1195 P1194
P0004
3. Switch the machine on
Turn the selector dial to the desired programme to
switch the appliance on.
To switch the appliance off turn it to Off.
Switching the machine on for
the first time
LANGUAGE
When switching on the appliance for the first time you
must set the language in which you want the indicators
in the display to appear.
Important!
If the display is not showing any language, the
appliance has already been switched on once. In such
case, go to the chapter «Change language» if you would
like to change the language setting.
Example:
1. Press the Change button until the desired language
appears in the display.
Change Options Exit
Sprache
DEUTCH
A
Temp. Spin Change Options Exit
Language
ENGLISH
Temp. Spin
Memory3
Cottons Economy
Off
Cottons
Synthetics
Delicates
Handwash
Wool
Silk Mini 30 Rinses
Drain
Spin
Gentle Spin
Memory2
Memory1
132985240.qxd 19/12/2005 16.52 Pagina 13