Zanussi TD 4212 - Manual (Page 11)

ENGLISH
11
Operating sequence
Before starting up for the first time it is advisable lo
load a few moist cloths into the dryer and to let it run
for about 20 minutes. This ensures that no dust and
dirt is left in the drum.
1. Load the laundry
Open the door.
Load the items one at a time, shaking them out
loosely and close the door.
Please check the laundry does not get caught
between the door and filter.
2. Depress button ,if required
3. Select the drying time
Turn the selector dial clockwise to the desired time,
in the high or low temperature section, depending on
the laundry.
100
M0045S
P1108 P1104
4. Start the machine
Depress Start-button , the mains-on light comes
on and the machine starts operating.
5. When drying is completed
The machine stops automatically. Turn the selector
dial to “
O”, the mains-on light goes out.
If the laundry is still too damp, select a further brief
drying time, bearing in mind that during the last 10
minutes the dryer carries out the cooling and anti-
crease treatment phase.
Clean the filters after every drying programme
(see page 13).
This will ensure correct functioning of the
appliance.
125994470.qxd 08/02/01 12.01 Pagina 11 (Nero/Process Black pellicola)