Yamaha RX-V561 User Manual

Page 38

Advertising
background image

34

En

Playback

■ Enjoying pure hi-fi stereo sound

The DIRECT STEREO mode allows sources to bypass the
decoders and DSP processors of this unit so that you can
enjoy pure hi-fi sound from 2-channel PCM and analog
sources.

Press C

DIRECT STEREO (or press DAMP and

then press V

DIRECT ST.) to select “DIRECT

STEREO”.

• To avoid unexpected noise, do not play CDs encoded in DTS

when the DIRECT STEREO mode is selected.

• When multi-channel signals (Dolby Digital and DTS) are input,

this unit automatically switches to the corresponding analog
input.

• No sound will be output from the subwoofer.
• “TONE CONTROL” (on this page) and “SOUND MENU” (see

page 48) settings (except for speaker level settings) are not
effective.

• The front panel display automatically dims.

■ Adjusting the tonal quality

Press 0

TONE CONTROL repeatedly to select

“BASS” or “TREBLE” and then press
A

PROGRAM l / h (or JPROGl / h) to

adjust the corresponding frequency response
level.
• Select “BASS” to adjust the low-frequency response.
• Select “TREBLE” to adjust the high-frequency

response.

• Speaker and headphone adjustments are stored independently.
• If you increase or decrease the high-frequency or low-frequency

sound to an extreme level, the tonal quality of the surround
speakers may not match that of the front left and right speakers.

■ Adjusting speaker levels during

playback

You can adjust the output level of each speaker while
listening to a music source.

This operation will override the level adjustments made in
“AUTO SETUP” (see page 24) and “SP LEVEL” (see page 50).

1

Press D

AMP and then press FLEVEL

repeatedly to select the speaker you want to
adjust.

y

Once you press FLEVEL on the remote control, you can
also select the speaker by pressing Gk / n.

2

Press Gl / h on the remote control to
adjust the speaker output level.
The control range is from +10 dB to –10 dB.

y

You can press 4A/B/C/D/E to select a speaker and then
5PRESET/TUNING l / h to adjust the speaker output
level.

Notes

Notes

Note

Display

Adjusted speaker

FRONT L

Front left speaker

FRONT R

Front right speaker

CENTER

Center speaker

SWFR

Subwoofer

SUR.L

Surround left speaker

SUR.R

Surround right speaker

Advertising