Zenith XBR411 - Manual (Page 11)

INTRODUCTION
11
Front Panel
z (REC) button
Starts recording. Press repeatedly
to set the recording time.
CH (v / V)
Scans up or down through
memorized channels.
N (PLAY)
To play back a disc or tape.
Z OPEN/CLOSE
Opens or closes the disc tray.
AV 2 IN
- VIDEO /AUDIO (Left/Right)
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
- S-VIDEO IN
Connect the S-Video output of an external
source (TV/ Monitor, VCR, Camcorder, etc.).
X/C (PAUSE/STEP)
Pause playback or recording
temporarily/press repeatedly for
frame-by-frame playback.
Disc Tray (DVD deck)
Insert a disc here.
POWER button and indicator
Switches the VCR/DVD Recorder ON and OFF.
Lights green when the VCR/DVD Recorder is turned on.
x (STOP)
Stops playback.
DUB (DUBBING)
Press to copy DVD
to VCR
(or VCR to DVD).
Cassette Compartment (VCR deck)
Insert a video cassette here.
Z EJECT
Ejects the tape in the VCR deck.
DVD/VCR
Toggles control between the DVD
deck and the VCR deck.
M/> (FORWARD)
DVD: Go to NEXT chapter/track. Press and hold for two seconds for a fast forward search.
VCR: Advances the tape during the STOP mode or for fast forward picture search.
./m (BACKWARD)
DVD: Go to beginning of current chapter/track or to previous chapter/track.
Press and hold for a fast reverse search.
VCR: Rewinds the tape during the STOP mode or for fast reverse picture search.
Display window
Shows the current
status of the
VCR/DVD Recorder.
Remote Sensor
Point the VCR/DVD
Recorder remote control
here.
DVD/VCR indicator
Indicates the active DVD or VCR
deck.