Zanussi ZYB 594 - Manual (Page 30)

30 electrolux
30
This means that, before activating the pyrolytic
cleaning function, you have to remove all the
oven accessories.
2. The Cooking Duration symbol will flash
for 5 seconds; during this time push ' ' or ' '
buttons to select the pyrolytic 1 (P I) or pyrolytic
2 (P 2) function (Fig. 19).
3. Once you have chosen the desired pyrolytic
function, the “P1” or "P2" writing will flash in
the display, alternating with the symbol
, waiting for confirmation to start the
pyro cleaning function.
4. To confirm which pyrolytic function you desire,
press button . The writing will stop flashing
and the symbol will disappear, the
acoustic signal will stop, the oven lamp will
switch off and the pyrolytic cleaning cycle starts
(Fig. 20).
As soon as the oven heats up, the thermometer
symbol rises slowly , indicating that the
temperature inside the oven is increasing.
5. When temperature inside the oven reaches
300°C, the door lock will be activated and the
related symbol will be displayed (Fig.21).
At the end of the pyrolytic cleaning process, the
display shows the time of day. The oven door is
locked.
Once the oven has cooled down, an acoustic signal
will be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time,
press button .
Fig. 21
Fig. 20
Fig. 19
NOTE: The time indication includes the cooling
down time.
If you select a cooking function while the
pyrolytic function is active, the cleaning
cycle will be interrupted.
If the oven door lock is activated, it is impossible to
select any cooking function until the door lock is off.