ZyXEL Communications ZyXEL ZyAIR AG-225H - Manual (Page 6)

ZyXEL AG-225H Quick Start Guide
5
Mode
When you need to connect the specific Aceess Point and lock
on it, push the “Next” button to select the desired Aceess
Point. To dedicate tracking a certain AP, hold the “Seek”
button to swith to mode.
Then push “Seek” button once again to periodically do the
site survey automatically in mode. By doing so, the modes
can be changed from mode to mode.
When ZyXEL AG-225H Wi-Fi Finder is not used for 1~2 minutes, the device
will enter into the power saving mode untill you push the “Seek” button again
for searching the access points.
Charging When low power icon appears , recharge the ZyXEL
AG-225H with your USB port on your laptop or desktop PC.
The LCM will display
when the device is charging and
display when the device finishs charging.
Note: To save power, switch off the ZyXEL AG-225H when not using Wi-Fi
Finder.