XM Satellite Radio Portable Satellite Radio - Manual (Page 19)

Troubleshooting
Your SKYFi Receiver is designed and built
to provide you with trouble-free perform-
ance without the need for service. If it does
not appear to be functioning correctly,
please follow these troubleshooting steps:
1. Make sure SKYFi is properly seated in
its cradle or stand.
2. Make sure all connectors are properly
attached in the back of the cradle or
stand.
3. If you are using the cigarette lighter/
auxiliary power adaptor to power your
SKYFi and cannot turn it on:
• Make sure the cigarette lighter/auxiliary
power socket is clean and free of
corrosion.
• Make sure the adaptor is firmly seated
in the cigarette lighter/auxiliary power
socket.
• Check the adaptor fuse by unscrewing
the ribbed end of the adaptor and
examining it. If required, replace with
a 1-amp fuse only. If your cigarette
lighter adaptor does not have a
removable end cap, then it is
equipped with an internal fuse that
resets itself after it is left unpowered
for a period of time.
4. If you are using the A/C adaptor in the
home or office, make sure it is plugged
in and that there is power at the outlet.
15
Section 5
If you see this on the display:
NO SIGNAL
Cause: The XM signal is out
of range.
ANTENNA
OFF AIR
Cause: The channel selected is
not currently broadcasting.
You should:
If you are using SKYFi at
home, reposition the antenna.
If you are using SKYFi in your
car, the message should dis-
appear as soon as you move
out of an obstructed area such
as an indoor garage. If the
problem persists, make sure
your antenna is mounted out-
side and on top of your car
with a clear view of the sky.
Make sure antenna is cor-
rectly attached to the SKYFi
Home Stand or SKYFi Car
Cradle and that antenna
cable is undamaged and
free from kinks. Turn the
SKYFi Receiver off and back
on to reset this message.
Tune in to another channel.