Yamaha DIO8 - Manual (Page 8)

8
I/Os
Slots
Eight slots (slots 1-8) are available on the DIO8 for installing digital I/O cards and analog I/O cards.
Slot 1 supports a serial interface card (not released yet).
● Optional interface cards
*: Manufactured by Apogee Corporation
■ Dimensions
• Specifications and appearance are subject to change without notice for improvement.
• For European Model
Purchaser/User information specified in EN55103-1 and EN55103-2.
Inrush Current: 10A
Conformed Environment: E1, E2, E3 and E4.
I/O connectors Level Type
INPUT A, B RS422 D-sub, half-pitch, 68-pin connector (female)
OUTPUT A, B RS422 D-sub, half-pitch, 68-pin connector (female)
COM RS232C D-sub,9-pin connector (male)
WORD CLOCK IN TTL/75 Ω (ON/OFF) *1 BNC connector
WORD CLOCK OUT (X4) TTL/75
Ω
BNC connector
*1 On the rear panel
Card Format Input Output
MY8-TD TASCAM 8 IN 8 OUT
MY8-AT ADAT 8 IN 8 OUT
MY8-AE AES/EBU 8 IN 8 OUT
MY8-AD ANALOG IN 8 IN —
MY4-AD ANALOG IN 4 IN —
MY4-DA ANALOG OUT — 4 OUT
AP8AD* ANALOG IN 8 IN —
AP8DA* ANALOG OUT — 8 OUT
400
41
1.6
176
480
185.5
I/O UNIT ID
PORT B SELECTOR
5-8
1-4
POWER
ON/ OFF
9.5
unit: mm