When you have finished using this unit, Bgv (background video) function, Rx-v520 only – Yamaha RX-V520 User Manual

Page 26

Advertising
background image

22

5

Play the source.
Refer to the instructions for the source component (and
“TUNING” for details).

Note

• When controlling an audio/video component (MD recorder, CD

player, DVD player, tape deck, etc.) with the remote control, press
one of the component selector buttons, (TAPE/MD, CD, DVD/
LD, etc.), which corresponds to the component you want to
control. Refer to “PRESET REMOTE CONTROL”.

6

Adjust the volume to the desired output level.

If desired, adjust BASS, TREBLE, BALANCE, etc.
These controls are only effective for the sound from the
main speakers.
• BASS controls the low-frequency response.
• TREBLE controls the high-frequency response.
• BALANCE adjusts the balance of the output volume

from the right and left main speakers.

7

Use the digital sound field processor.
Refer to “Selecting a DSP Program”.

To mute the sound

Use this when you want to temporarily mute audio output.

Press MUTE on the remote
control.
To restore the audio output to
the previous volume level, press
MUTE again.

Note

• During muting, “MUTE ON” appears on the display.

When you have finished using this

unit

Press STANDBY/ON (or POWER) to set this
unit in the standby mode.

PLAYING A SOURCE

Notes on the digital signal

The digital input jacks of this unit can also handle
96-kHz sampling digital signals. (To utilize this, use a
source that supports 96-kHz sampling digital signals and set
the player for digital output. Refer to the operation
instructions for the player.) Note the following when a
96-kHz sampling digital signal is input to this unit:
1. The following indication will appear on the display.

2. DSP programs cannot be selected. Sound will be output

as normal 2-channel stereo sound from only the left and
right main speakers.

Note

• If “MAIN SP” in the SET MENU is set to SMALL and

“BASS OUT” is set to SWFR or “BASS OUT” is set to
BOTH, the sound is also output from the subwoofer.

3. Adjustment of the speaker output level described on

page 37 cannot be made (except the level of the
subwoofer)

BGV (background video) function

The BGV function allows you to combine a video image
from a video source with a sound from an audio source.
(For example, you can listen to classical music while you
are watching a video.) This function can only be controlled
with the remote control.

Play a video source, and then select an audio source with
the input selector buttons on the remote control. The BGV
function does not work if you select the audio source with
INPUT l / h on the front panel.

PROGRAM

Front panel

Remote control

or

VOLUME

Front panel

Remote control

or

BASS

BALANCE

+

L

R

TREBLE

+

Front panel

PCM

K

Z

H

RX-V520 only

0104V520/V420_21-25_EN

2/6/1, 2:39 PM

22

Advertising