Zanussi 285758 - Manual

ZANUSSI
P R O F E S S I O N A L
PASTA COOKERS
SNACK 600
SCPE 350
Supply voltage 400 V, 3N, 50/60
Net weight - kg. 33 35
installed-electric 5
Power - kW
gas 10
Power - kW
N° of wells 1 1
height 290 290
depth 340 340
width 305 305
Usable well dimensions - mm
height 850 850
depth 600 600
width 350 350
External dimensions - mm
Power supply Electric Gas
SCPE350
285758
SCPG350
285772
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
Ideal for smaller sized catering
establishments: bars, pubs, fast food
outlets, pizzerias and small hotels;
the Snack 600 range of modular
cooking appliances consists of a
series of appliances each with a
depth of 600 mm - in gas and
electric - featuring high power for
fast service whether in table top
situations, where space is at a
premium, or in a complete cooking
installation, using the base units that
can include doors, drawers or
runners for gastronorm containers.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
�
Constructed completely in 18/10,
304 AISI stainless steel to guarantee
a hard-wearing performance. The
units include stainless steel height
adjustable feet
�
Hygiene guaranteed by rounded
edges, flush fit between units, side
upstands and sealing joints,
completely smooth and easy to
clean surfaces
� Stainless steel pressed well, 15/10
in thickness, for use with 2/3 GN
containers/baskets.
�
Overflow and water drain by
means of an overflowpipe
� Well filling by means of an
overflowpipe
�
False bottom, to support the
baskets, supplied as standard.
�
Baskets are not supplied as
standard and therefore must be
ordered as accessories
�
All models comply with the
standards required by the main
international approval bodies and
are H marked.
ELECTRIC MODELS
�
Heating via incoloy armoured
steel elements placed under the well
� Thermostatic temperature control
� High limit safety thermostat
GAS MODELS
�
Burners placed under the well
� Automatic piezo ignition, flame
failure device and pilot light
�
The gas appliances are supplied
for use with natural gas, with LPG
conversion jets supplied as standard.
� Tap valve.
installation diagram: B - Cold water inlet; C - Water
drain