Yamaha RX-V463 - Manual (Page 12)

Quick start guide
8
En
■ After using this unit...
Press A
STANDBY/ON on the front panel to set
this unit to the standby mode.
This unit is set to the standby mode. In the standby mode,
this unit consumes a small amount of power in order to
receive infrared signals from the remote control. To turn
on this unit from the standby mode, press ASTANDBY/
ON (or HPOWER). See page 21 for details.
What do you want to do with this
unit?
■ Customizing the SCENE templates
• Using various SCENE templates
☞ P. 28
• Creating your original SCENE templates
☞ P. 31
■ Using various input sources
• Basic controls of this unit ☞ P. 33
• Enjoying FM/AM radio programs ☞ P. 43
• Enjoying XM Satellite Radio programs
☞ P. 46
• Enjoying SIRIUS Satellite Radio programs
☞ P. 51
• Using your iPod with this unit. ☞ P. 57
• Using your Bluetooth components
with this unit. ☞ P. 59
■ Using various sound features
• Using various sound field programs
☞ P. 38
• Using the direct mode for the high
quality sound ☞ P. 41
• Customizing the sound field programs
☞ P. 40
■ Adjusting the parameters of this unit
• Automatically optimizing the speaker
parameters for your listening room
(AUTO SETUP)
☞ P. 24
• Manually adjusting various parameters of
this unit ☞ P. 61
• Setting the remote control
☞ P. 73
• Adjusting the advanced parameters ☞ P. 76
■ Additional features
Automatically turning off this unit
☞ P. 37
01EN_RX-V463_U.book Page 8 Friday, February 1, 2008 11:43 AM