Select the required programme, Start the machine, At the end of the programme – Zanussi FJ 1094 G User Manual

Page 10

Advertising
background image

10

5. Select the required programme

Turn the programme selector dial clockwise to the
required programme.

6. Start the machine

Before starting up the machine check that:

the appliance is plugged in

the water supply taps are turned on

the drain hose is correctly and securely positioned

the door and the detergent dispenser drawer are
closed.

Depress the ON/OFF button: the mains-on light and
door locked light will illuminate and the machine starts
operating.

7. At the end of the programme

The machine stops automatically.

If you have depressed the rinse hold button, the
machine will stop with the water left in the tub, to
prevent the fabric from creasing. To drain the water
release the same button (the clothes will be gently spun)
or select programme P.

The door is controlled by a safety device which releases
2 minutes after the end of the programme. The door
locked light will go out.

Switch the machine off by depressing the ON/OFF
button again. The mains-on light will go out.

When the programme has finished you are advised to
unplug the appliance and turn off the water taps.

P0527

H

P0471

Advertising