Zanussi FJ 1454 W - Manual (Page 8)

8
To select Drain, press the SKIP button three times, the
wash - rinses - spin LED,s go out.
If you wish to cancel or advance the running programme
to the required phase, PAUSE the cycle and then press
the SKIP button as previously described.
12 Programme phase indicator
lights
When you select a programme, the lights relevant to the
phases that form the programme light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried out
will remain lit.
At the end of the programme the pilot light
illuminates.
If the light lights up at the end of the programme this
means that the drain filter is clogged.
In the event of operating problems the light of the
START/PAUSE button
and one of the following
lights start to flash:
= the machine does not fill
= the machine does not empty
= the door has not been closed
To eliminate the problem, see paragraph “Something not
working”.
PREWASH
WASH
RINSES
RINSE HOLD
SPIN
DRAIN
FILTER
END
PREWASH
WASH
SPIN
RINSES
DRAIN
FILTER
END
RINSE HOLD
Selecting a special programme:
A wash programme must be selected in the normal way.
(START button not pressed)
A normal wash cycle consists of the following phases,
Wash - Rinses - Spin and is confirmed by the
illumination of the corresponding LED,s.
To select rinses & spin, press the SKIP button once, the
wash LED goes out.
To select spin only, press the SKIP button twice.
The wash & rinses LED,s go out.
PREWASH
WASH
SPIN
RINSES
DRAIN
FILTER
END
RINSE HOLD
PREWASH
WASH
SPIN
RINSES
DRAIN
FILTER
END
RINSE HOLD
PREWASH
WASH
SPIN
RINSES
DRAIN
FILTER
END
RINSE HOLD
START/PAUSE
132994360.qxd 6/6/02 4:18 PM Pagina 8 (Nero/Process Black pellicola)