ZALMAN CNPS7000A - Manual (Page 5)

4
Caution)
As shown in Figure 2 a motherboard that is not compliant with the “10.2mm motherboard
component height restriction” standard, introduced by Intel, may create interference between
components and the clip. Please do not install the CNPS7000A when this interference is observed.
No components higher than 3.9cm should be present within 5.5cm radius from the center
of the CPU to install this product.
10.2mm Motherboard component height restriction
Clip
Clip
Mainboard
component
Mainboard
component
Figure 1 (O)
Top View Top View
Side View Side View
Figure 2 (X)
2) AMD Athlon/Duron/Athlon XP - Socket 462
All CPUs conforming to Socket 462 platform
Caution)
This product requires "Heatsink Attach Holes" around CPU
Socket as shown on the right figure.
No components higher than 3.9cm should be present within
5.5cm radius from the center of the CPU to install this product.
This product can not be installed if any Motherboard
component(capacitor) taller than 1.5cm is located
under the clip.
For more information, refer to “Compatible Motherboard List”
at our website(www.zalmanusa.com).
3) AMD Athlon 64 - Socket 754
Visit our website (www.zalmanusa.com) for a list of compatible CPUs after Athlon 64
is officially released.
SOCKET462
4-4bl 4-4bl
1-2bl1
-2
bl