Xerox DocuPrint Printer 3 - Manual (Page 52)

Appendix B: Set an IP Address
52 ❖ Quick Network Install Guide
Static Addressing
Windows 95/98
1 Open an MS-DOS session.
2 Ping a known IP address on the network. (Type “ping
x.x.x.x” where x.x.x.x is the IP address of a device on the
network.)
NOTE: This step is required.
3 Create a static ARP entry by typing the following
command:
arp –s x.x.x.x aa-aa-aa-aa-aa-aa <CR>
where x.x.x.x is the IP address you are assigning to the
CentreDirect External Print Server (External Ethernet
Adapter)
and aa-aa-aa-aa-aa-aa is the Ethernet address of
the CentreDirect External Print Server (External
Ethernet Adapter) .
4 Type arp –a <CR>. A list should appear that shows the
host that was pinged and the new entry.
5 Type Telnet x.x.x.x <CR>.
6 When the telnet window appears, enter ! and then yes to
enter monitor mode.
7 Type I to enter the IP address. Enter the desired IP address.
8 Reboot the CentreDirect External Print Server (External
Ethernet Adapter) by typing R.