Yamaha RX-460 - Manual (Page 12)

12
REMOTE CONTROL TRANSMITTER
The remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the
CD player, turntable, equalizer, and tape deck connected to this unit are YAMAHA components designed for remote control
compatibility (components with an mark), then this remote control transmitter will also control various functions of each
component. Please consult YAMAHA dealer for information on which components are compatible with the remote control
transmitter.
KEY FUNCTIONS
STANDBY mode (Europe model only)
While the power is on, pressing the POWER key on the remote
control transmitter switches the unit to the STANDBY mode. (In
this mode, the indicator is half illuminated.)
POWER
PLAY/CUT
SKIP PLAY
SEARCH PAUSE/STOP DISC SKIP
CD
PHONO
SLEEP
TUNER A/B/C/D/E
AUX EQ ON/FLAT
TAPE 1 DIR B
TAPE 2
MONITOR
+ —
REC MUTE
EQ PRESET + —
PRESET + —
DECK A/B
PLAY
DIR A
STOP REC PAUSE
VOLUME
POWER
PLAY/CUT
SKIP PLAY
SEARCH PAUSE/STOP DISC SKIP
CD
PHONO
SLEEP
TUNER A/B/C/D/E
AUX EQ ON/FLAT
TAPE 1 DIR B
TAPE 2
MONITOR
+ —
REC MUTE
EQ PRESET + —
PRESET + —
DECK A/B
PLAY
DIR A
STOP REC PAUSE
VOLUME
Turns the power on/off. The power to the receiver is automatically
turned off one hour after this key is
pressed (so that “SLEEP” illuminates in
the display).
Selects input source.
Turns the volume level up/down.
Controls compact disc player.
*
DISC SKIP is applicable only to
compact disc auto changer.
Controls tuner
+ : Selects higher preset station number.
– : Selects lower preset station number.
A/B/C/D/E:
Selects the page (A – E) of
preset stations.
Controls tape deck.
*
DIR A, B and DECK A/B are
applicable only to double
cassette tape deck.
* For a single cassette deck with
automatic reverse function,
pressing DIR A will reverse the
direction of tape running.
Controls equalizer.
*
+ and – keys select any preset
equalizer curve whenever they
are pressed.
Starts/stops record play on turntable.
POWER on mode STANDBY mode
For Controi of This Unit
For Other Component Control
Identify the remote control transmitter keys with your component’s keys. If these keys are identical, their function will be the
same. On each key function, refer to the corresponding instruction on your component’s manual.