Select the spin speed or the rinse hold option, Select the desired options, Select the super rinse or 40°aa option – Zanussi ZWF 1217 W User Manual

Page 11: Select the delay start, Start the programme, How to change a programme during its cycle

Advertising
background image

11

7. Select the spin speed or the

Rinse Hold option

Press the “Spin” button repeatedly, in order to select the
desired spin speed or the Rinse Hold option. The
relevant light will light up.
If you select the Rinse Hold option, the machine will
stop at the end of the programme with the water still in
the tub.

8. Select the desired options

If your laundry is very dirty, it may be advisable to
select the Prewash option.
If you wish the laundry to undergo a soak, select the
Outdoor Sports option.
If your laundry is only slightly soiled, select the Extra
Quick option.

9. Select the Super Rinse or

40°AA option

If you wish the laundry to undergo an extra rinse, select
the Super Rinse option.

If your laundry is lightly or normally soiled and it is
necessary to prolong the washing time, select the 40°
AA option.

Extra

Quick

Prewash

Outdoor

Sports

Spin

1200

900

700

500

Rinse Hold

60°C

50°C

95°C

40°C

30°C

Temp.

The relevant light illuminates.

10. Select the DELAY START

Before you start the programme, if you wish the
starting to be delayed, press the DELAY START button
repeatedly, or keep it pressed, to select the desired delay.
The selected delay time value (up to 23 hours) will
appear on the display for 3 seconds, then the duration of
the programme will appear again.
If the Outdoor Sports option has been choosen, the
selected delay will correspond to the soak time. In this
case the display will show after 3 seconds the entire
programme duration (including the soak phase).

11. Start the programme

Press the Start/Pause button. The relevant light will stop
flashing and only the light relevant to the phase that is in
progress will remain lit.
If you have chosen a delayed start, the washing machine
will begin the countdown.
The display will show the duration of the programme or
the selected delay.

12. How to change a programme

during its cycle

Before you make any change, you must pause the
washing machine by pressing the Start/Pause button.
It is possible to change any phase before the programme
carries it out.
Changing the type of fabric or temperature is possible,
obviously, only during the washing phase. When you
make a change in these two parameters, the washing
machine will resume the cycle from the beginning.

Delay

Super

Rinse

40° AA

Advertising