ZyXEL Communications SMG-700 - Manual (Page 73)

Chapter 5 AP Mode
NWD-270N User’s Guide
73
5.5 The MAC Filter Screen
The MAC Filter screen allows you to configure the NWD-270N to give exclusive access to
devices (Accept) or exclude devices from connecting to the NWD-270N (Reject). The MAC
address is assigned at the factory and consists of six pairs of hexadecimal characters, for
example, 00:A0:C5:00:00:02. You need to know the MAC address of the device(s) to
configure this screen.
Figure 60 The MAC Filter Screen
The following table describes the labels in this screen.
Table 25 MAC Filter
LABEL DESCRIPTION
Filter Type Define the filter action for the list of MAC addresses in the MAC address filter table.
Select Disable to deactivate the MAC filter feature.
Select Reject to block access to the NWD-270N, MAC addresses not listed will be
allowed to access the NWD-270N.
Select Accept to permit access to the NWD-270N, MAC addresses not listed will
be denied access to the NWD-270N.
Filter MAC
Address 1-16 Specify the MAC address(es) of the wireless station(s) that is allowed or denied
association to the NWD-270N.
Enter six pairs of hexadecimal digits (separated by colons) in the range of “A-F”,
“a-f” and “0-9” (for example, 00:A0:C5:00:00:02).
If you enter an invalid MAC address, once you click Save to save the values, a
warning screen will be displayed.
Save Click to save the changes.
Cancel Click to discard the changes.