Zenoah BC250 - Manual (Page 18)

18
6. Set up
English
■ INSTALLING HANDLE
• Mount the handle to the shaft tube and clamp it at a
location that is comfortable to you. (SE1)
(1) About 19 inches (48cm)
■ INSTALLING DEBRIS GUARD
• Put the debris guard on the gear box, attach it with
the screws and hardware provided. (SE2)
■ INSTALLING CUTTING HEAD (SE3)
1. While locking the gear shaft, by inserting the
supplied tool into the upper holder on the gear box,
loosen and remove the hexagon nut (left-handed).
2. Fit the line head assembly to the gear shaft over the
holders. Hand-tighten it securely.
Blades should not be used on this model trimmer.
(1)
SE1
SE2
SE3