Yamaha Digital Sound Projector YSP-3050 - Manual (Page 31)

Using SET MENU
27
En
SETUP
English
The following diagram illustrates the overall flow of the setup procedure.
The flow chart of SET MENU
Run AUTO SETUP (IntelliBeam).
See “AUTO SETUP (IntelliBeam)” on page 29.
Look for a remedy.
See “Error messages for AUTO SETUP” on page 35 for a complete list of error
messages and possible remedies.
Play back audio signals or adjust the settings for the beam mode and the CINEMA DSP.
See “Playback” on page 39, “Enjoying surround sound” on page 56, and “Using sound field programs” on
page 65.
Run MANUAL SETUP.
See “MANUAL SETUP” on page 74.
y
• If you cannot clearly hear a sound beam from a specific channel, adjust settings for
SETTING PARAMETERS (see page 76) or for BEAM ADJUSTMENT (see page 77) in
BEAM MENU.
• If there are acoustically absorbent objects such as curtains in the path of the sound beams,
adjust settings for TREBLE GAIN in BEAM MENU (see page 79).
If an error occurs
If you want to make additional settings
and adjustments
Run LANGUAGE SETUP.
See “Changing OSD language” on page 28.