ZyXEL Communications PRESTIGE 153 - Manual (Page 90)

Prestige 153/153X WAN Bridge/Routers
4-18 Remote Node Configuration
Table 4-4. Remote Node Profile Menu Fields for Leased Lines (continued)
Field Description Option
Backup Line Call Direction When the backup function is enabled and if all links
(WAN Ports) in a leased line connections drop, your
Prestige will pick up an available dial-up WAN port to
trigger a backup connection. Press space bar
to toggle
[Both/None/Out
going/Incoming]
l If this parameter is set to [Both], your Prestige
can both place and receive calls to/from this
remote node. [Both]
(default)
l Set this parameter to [None] to de-activate the
Backup Line function. [None]
l If set to Incoming, your Prestige will not place a
call to a remote node. [Incoming]
l If set to Outgoing, your Prestige will drop any
call from a remote node. [Outgoing]
Device Type
(*for backup line only)
Use the space bar to choose the following selections:
Modem / ISDN TA / X.25 PAD / 56K Modem.
Your Prestige will only select a free device of the
specified device type to place a call.
[Modem]
[ISDN TA]
[X25 PAD]
[56K Modem]
Pri(mary) Backup Phone #
(*for backup line only)
Enter the primary telephone number that your
Prestige will dial when the backup line function is
triggered.
Sec(ondary) Backup Phone #
(*for backup line only)
Enter the secondary telephone number that your
Prestige will dial when the backup line function is
triggered.