Yazoo/Kees ZVKH61273 EN - Manual (Page 25)

English-
23
CONTROLS
Cutting height pedal
On some models there is a deck assist lift
pedal to aid in the lifting of the deck.
Pump release valves
Pump release valves are located at the
pumps. They are used to release the system
so the machine may be moved by hand when
not running. Tilt seat forward to gain access
to the pumps. Use a 5/8” wrench to open
valve.
Accessories
For mulching, there is a BioClip attachment
available. This is mounted underneath the
mower deck and consists of control plates
and BioClip blades.
8011-465
Cutting height pedal
IMPORTANT INFORMATION
Only rotate valve 1/4 - 1/2 turn to release
system.
Tighten the valve moderately.
Do not overtighten the valve when
closing. That can damage the valve seat.
8011-507
Pump release valve
8011-566
BioClip attachment