Xyron FPO - Manual (Page 5)

7 8
(fig.1)
5
7
2
9
11
3
13
• Place a Xyron ® Design Disc ™ into the
bottom of the Xyron ® Design Disc ™ Maker.
(fig.1)
• Each letter on the keypad corresponds to
a numbered design. Look at the insert
that comes with the Design Disc and use
the chart below to select the desired designs.
k+i+g=
• Only the letters
corresponding to your
selected designs, not the
designs themselves, will
show on the LCD screen.
• Select the desired size.
• Press the save button.
General Information
• The Xyron ® Design Disc ™ Maker will turn off after 5 minutes without
use. Any typed text that has not been saved will be lost.
• You cannot save to or erase Design or Font discs.
• The Xyron Design Disc Maker uses one 9V battery (included).
• Use the Xyron® Design Runner ™ Accessory Kit with the Xyron ® Design
Runner ™ to print perfectly straight lines, italics and symmetrical arcs.
• For portability and convenience, store the Xyron ® Design Disc ™ Maker
with the Xyron ® Design Runner ™ in the Xyron ® Design Runner ™ Carry
Bag.
• The Xyron ® Design Disc ™ Maker uses only Xyron ® Design, Font and
Blank Discs.
• When a Blank Disc is inserted into the Blank Disc Slot, the available
memory will appear on the LCD screen as a fraction. For example,
50/215 means that there is space for up to 50 uppercase, full sized
letters on the disc for a total of 215 spaces.
• If you plan to print your custom phrases with the Xyron Design Runner
using Continuous Mode, program a space at the end of the phrase or
design to ensure proper spacing.
(Design Disc insert example)