ZyXEL Communications 2864I - Manual (Page 74)

Dial-In Configuration 61
router on the remote network (see Chapter 5). An example of
the Prestige being used as a dial-in server is shown below:
Figure 6-2 Example of a Dial-In Server Application
Default Dial-In Setup
This section covers the default dial-in parameters. The
parameters in Menu 13 affect incoming calls from all Remote
Dial-in Users and Remote Nodes before authentication is
completed. Once authentication is completed, and if it matches
a Remote Node, the Prestige will use parameters from that
particular Remote Node.