ZyXEL Communications G-302 - Manual (Page 44)

ZyXEL G-302 v3 User’s Guide
44 Chapter 3 ZyXEL Utility Configuration
3.4 The Adapter Screen
To set the advanced features on the G-302 v3, click the Adapter tab.
Figure 26 Adapter Screen
The following table describes the labels in this screen.
Table 13 Adapter
LABEL DESCRIPTION
Adapter Setting
Wireless Mode Select 802.11b Only to have the G-302 v3 connect to an IEEE 802.11b wireless
device.
Select 802.11b/g Mixed to have the G-302 v3 connect to either an IEEE 802.11g
or IEEE 802.11b wireless device
Preamble Mode Select a preamble type. Choices are Long, Short and Auto.The default setting is
Auto.
Refer to
Section 2.4 on page 29 for more information.
Save Click Save to save the changes back to the G-302 v3.