Care and cleaning – Zanussi ZWH 7162 J User Manual

Page 14

Advertising
background image

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Spin Speed

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

DRAIN

Draining of water

Max. load 7 kg

For emptying out the water of the last rinse in programmes with

the Rinse Hold or Night Cycle option selected.

SPIN

Drain and long spin

Maximum spin speed at 1600 rpm

Max. load 7 kg

Separate spin for hand washed cotton garments and after pro-

grammes with the Rinse Hold or Night Cycle option selected.

You can choose the spin speed by pressing the relevant button

to adapt it to the fabrics to be spun.

SPIN REDUCTION

= OFF

For cancelling the programme which is running or to switch the machine off .

1) This option is not active at a temperature lower than 40° C.

2) If you select the Super Quick option by pressing button 3, we recommend that you reduce the maximum load as indicated. Full

loading is possible however with somewhat reduced cleaning results.

3) Max. load with Easy iron option 1 kg

4) If using liquid detergents, a programme without PREWASH must be selected.

Care and cleaning

Warning! You must DISCONNECT the appliance

from the electricity supply, before you can carry out

any cleaning or maintenance work.

Descaling

The water we use normally contains lime. It is a good idea

to periodically use a water softening powder in the ma-

chine. Do this separately from any laundry washing, and

according to the softening powder manufacturer's instruc-

tions. This will help to prevent the formation of lime de-

posits.

External cleaning

Clean the exterior cabinet of the appliance with soap and

water only, and then dry thoroughly.

Cleaning the dispenser drawer

The washing powder and additive dispenser drawer

should be cleaned regularly.

MAX

Remove the drawer by

pressing the catch down-

wards and by pulling it

out. Flush it out under a

tap, to remove any traces

of accumulated powder.

MAX

To aid cleaning, the top

part of the additive com-

partment should be re-

moved.

14

Advertising