ZyXEL Communications Prestige 650H-E Series - Manual (Page 17)

Prestige 650H-E
17
If you do not assign an IP Address, then all packets received for ports not
specified in this screen will be discarded.
From the main screen click Advanced Setup and then NAT to open the main NAT screen. Select
SUA Only and click Edit Details.
Figure 15 SUA/NAT Server
The following table describes the labels in this screen.
Table 4 SUA/NAT Server
LABEL DESCRIPTION
Start Port
No. Type a port number in this field. To forward only one port, type the port number again in the
End Port field. To forward a series of ports, type the start port number here and the end port
number in the End Port field.
End Port
No. Type a port number in this field. To forward only one port, type the port number in the Start
Port field above and then type it again in this field. To forward a series of ports, type the last
port number in a series that begins with the port number in the Start Port field above.
IP Address Enter the inside IP address of the server here.