XM Satellite Radio SRXM-001 - Manual (Page 7)

128-6210
7 of 12
DIRECTLY ACCESSING A CHANNEL
To directly access a specific channel, proceed as follows:
1. Press the Shift (SFT) button; the channel number (CH 020)
flashes for 5 seconds in reverse image format.
2. While the channel number is flashing for the 5-second period,
use the number buttons on the keypad and enter the desired
channel.
3. The selected channel number will appear flashing for 5 sec-
onds and then remain steady.
NOTE: If the selected channel is not available, (---) will appear
on the display and the system will remain tuned to the
previous channel.
SPECIAL FUNCTIONS USING THE SHIFT BUTTON
There are a number of user preference functions that can be adjusted
simply by using the Shift (SFT) button with a specific number code.
These functions are explained in the following paragraphs.
In general, a shift/code is entered in the following manner:
, where:
(SFT) represents Shift button
activation and XX represents the
specific function code. (The 4-digit
code always starts with 09.)
PRESETTING A DESIRED CHANNEL
Up to 10 channels can be preset on your SCU for rapid and easy ac-
cess. Channel preset is accomplished as follows:
1. Select the desired channel you wish to save in memory by using
the directional buttons, direct access method, or category se-
lect tuning method.
2. With the desired channel accessed and displayed, press and
hold any one of the numbered keypad buttons for more than 1
second.
3. Note that the preset number appears in reverse image format in
the lower right-hand corner of the display on the same line as
the channel number.
4. Repeat the procedure in steps 2 and 3 to save nine other
desirable channels for quick access.
7
SFT
0
4
7
1
5
8
2
6
9
3
AUDIO OX
20 on 20
The Techs
Oh Baby Oh Baby
-----------------------
CH 020 Pop
PRESS KEYPAD BUTTONS
TO SELECT DESIRED
CHANNEL
PRESS THE SHIFT
BUTTON CHANNEL NUMBER
FLASHES
SFT
0
4
7
1
5
8
2
6
9
3
AUDIO OX
The Joint
Khrisp
Oh Baby Oh Baby
-----------------------
CH 026 Adventure 6
SELECT THE
DESIRED CHANNEL
PRESS AND HOLD
ANY NUMBER BUTTON
(0-9) TO COMMIT THE
CHANNEL TO PRESET
MEMORY
THE PRESET MEMORY
LOCATION APPEARS
HERE