Xerox 701P35371 - Manual (Page 63)

U s e r G u i d e
8.3
P A P E R F E E D I N G P R O B L E M S
Paper Feeding Problems
Symptom DiagnosDia Diagnosis and/or Solution gnosis and ors and/
Paper sticks together • Ensure there is not too much paper in the tray. Depending on
the thickness of your paper, the paper tray can hold up to 150
sheets.
• Ensure you are using the correct type of paper. Remove paper
from the feeder and flex or fan the paper.
• Humid conditions may cause some paper to stick together.
More than one sheet of
paper being fed • There may be different types of paper in the tray. Load paper of
only one type, size, and weight at a time.
Paper skews or buckles • Ensure that the paper in the tray is not overloaded. Depending
on the thickness of your paper, the feeder can hold up to 150
sheets of paper.
• Try another type of paper. Ensure the paper is not bowed in the
tray.
• Ensure the paper guides are adjusted snugly against the paper.
• If you are printing envelopes, ensure the paper thickness knob
is set to the envelope setting.
Transparencies stick
together in the paper exit • Use only transparencies specially designed for an ink jet printer.
• Remove each transparency as it leaves the printer.
• Ensure transparency is loaded rough-side down.
Envelopes skew or fail to
feed correctly • Ensure that the paper guide is against the left side of the
envelopes.
• Ensure envelopes are correctly oriented.
00-ugm940.book Page 3 Monday, July 31, 2000 3:20 PM