Xerox 92C NPS - Manual (Page 26)

PRINTERS
3-4 XEROX DOCUPRINT 92C NPS SYSTEM OVERVIEW GUIDE
You can ignore this message. As soon as the page image is
available, the Printer Controller cycles up the printer and printing
automatically resumes.
Stop button Pressing the Stop button halts printing without interrupting input
processing.
Fault code display Shows the number of completed prints and printer fault codes. When
a fault code displays here, the corresponding message appears in
the message display.
Information button When “i” appears on the message display, you can press this button
for additional information on printer operation. You can press the
button repeatedly for more information as long as “i” appears.
Additional features
Additional features of the DocuPrint 92C NPS are:
Instruction labels Located throughout the printer to assist you with a variety of tasks.
Power savers To conserve energy, the printer has two power savers: one for the
raster output scanner (ROS) and one for the fuser.
After a predetermined period, each of these parts times itself out and
shuts down. The time-out period can be adjusted by a service
representative to meet your needs. The Printer Controller
automatically brings the printer out of power saver mode when there
is a document to be printed.
•
The ROS power saver times itself out after about an hour of
inactivity and requires about 30 seconds to warm up.
• The fuser power saver times itself out after about four hours and
requires four to seven minutes to warm up.
Language button Systems with the dual language option have this button to select a
different language, such as French instead of English, for the
message display.