Yamaha DSP-A2 - Manual (Page 22)

20
This unit is equipped with additional 6-channel audio signal
input terminals (for left main, right main, center, left rear
surround, right rear surround and subwoofer channels) for
inputting signals from an external decoder of a future format to
this unit.
To listen to a sound by reproducing signals input to these
terminals, press the EXT. DECODER button on the front panel
so that “EXT. DECODER IN” appears on the display. By doing
so, the signals input to these terminals are sent to the
corresponding SPEAKERS terminals and OUTPUT terminals
of this unit. Notes
● When signals input to these terminals are selected, the
digital sound field processor cannot be used.
● The settings of “1A” to “1E” in the SET MENU mode have
no effect on the signals input to these terminals. The setting
of “1F. MAIN LEVEL” is effective. (Refer to pages 26 to 27
for details.)
● The adjustments of the output level of the center speaker,
rear speakers and subwoofer are effective when the signals
input to these terminals are selected as the input source.
(Refer to pages 43 to 44 for details.)
Ⅵ
Connecting an external decoder of a future format to this unit
VIDEO
DVD/LD
TV/DBS
IN
VCR 1
OUT
IN
TUNER
VCR 2
OUT
VIDEO
S VIDEO
DVD/LD
TV/DBS
IN
VCR 1
OUT
IN
VCR 2
OUT
MONITOR
OUT
S VIDEO
AUDIO SIGNAL VIDEO SIGNAL
EXTERNAL DECODER INPUT
2
MAIN
SUB WOOFER CENTER
SURROUND
TV/DBS
CD
CD
DVD/LD
TAPE/MD
IN
(PLAY)
OUT
(REC)
DVD/LD
COAXIAL
OPTICAL
DIGITAL
RF SIGNAL
DIGITAL SIGNAL
GND
PHONO
1
CD
TAPE/MD
3
4
IN
( PLAY )
OUT
( REC )
AUDIO SIGNAL
SUBWOOFER
OUT
SURROUND OUT
CENTER
OUT
MAIN OUT
External decoder
(Europe model)
PREPARATION