ZyXEL Communications ZyXEL ZyAIR AG-220 - Manual (Page 13)

ENGLISH
13
• To disable the ZyXEL utility, right-click the icon and select
Use Windows Zero Configuration. To activate the ZyXEL
utility again, double-click the icon and click OK.
• To install the driver only, select Driver only.
Troubleshooting
• If the LINK light on the AG-220 is not on after you have
installed the utility and the AG-220, make sure the AG-220 is
properly inserted.
• If the icon does not display, uninstall and re-install the util-
ity. See the User’s Guide for how to uninstall the utility.
• If your AG-220 does not connect to a wireless network, make
sure there is an available wireless network within range (see
your User’s Guide for more details about the site survey fea-
ture). If wireless security is enabled for that network, you
need to configure the security settings of your AG-220 (see
the User’s Guide).
Important Information
Federal Communications Commission
(FCC) Interference Statement
The 802.11g Wireless LAN Adapter has been tested to the
FCC exposure requirements (Specific Absorption Rate).