Xerox 4150 - Manual

LOAD PAPER
FAX
TOUCH SCREEN - Displays all the available
features and general machine information
CLEAR ALL - Resets job programming to the
default settings
PAUSE - Interrupts current printing job
START - Starts the job
SERVICES: Displays the Services screen to enable selection of job features
JOB STATUS: Displays the job queue information
MACHINE STATUS: Displays machine information
Features* are accessible by touching All Services.
*Some features may not be available on your model.
LOAD PAPER
• Open the required
paper tray.
• Load the paper, do
not load above the
maximum fill line.
• Adjust the guides to
touch the edge of
the paper.
• Close the paper
tray, except the
Bypass Tray.
• Confirm the paper
size/type settings
on the user
interface.
QUICK FAX
• Load the original
face up in the
document handler.
• Select FAX from the
All Services screen.
• Enter the recipient
fax number using
the keypad or select
the number from the
ADDRESS BOOK.
• Touch the screen
buttons to make
feature selections.
• Press START.
QUICK E-MAIL
• Load the original
face up in the
document handler.
• Select E-MAIL from
the All Services
screen.
• Input the E-mail
address or make a
selection from the
ADDRESS BOOK.
• Touch the screen
buttons to make
feature selections.
• Press START.
QUICK COPY
• Load the original
face up in the
document handler.
• Select COPY from
the All Services
screen.
• Touch the screen
buttons to make
feature selections.
• Press START.
For more information... 1. Press the Help button on the control panel, 2. refer to the Getting Started Guide, 3. refer
to the User Guide on the User Documentation CD, or 4. visit our website on... www.xerox.com/support
WorkCentre 4150
E-MAIL
COPY
Copyright © 2006 Xerox Corporation. All Rights Reserved 708PXXXXX