ZyXEL Communications ES-2048 - Manual (Page 83)

ES-2000 Series Switch Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
83
checking the remove checkbox and then, click on the Remove button to
remove a cluster member.
FAQ
What is the default setting of the IP parameters?
IP address: 192.168.1.1
Subnet: 255.255.255.0
What is the default login Name and Password of the Web Configurator?
ID: admin
Password: 1234
How to access my SWITCH through the console port?
Connect the male 9-pin end of the console cable to the console port of the
Switch. Connect the female end to a serial port (COM1, COM2 or other COM
port) of your computer, which has terminal emulation software configured to
the follow parameters:
Terminal emulation: VT100
Baud rate: 9600 bps
Data bits: 8
Parity: none
Stop bit: 1
Flow control: none
What is default login password of the console, telnet, and FTP?