Sony SLV-SE100A2 - Manual (Page 83)

83 Specifications
Ad
diti
ona
l Inf
o
rma
tion
Specifications
System
Channel coverage
PAL (B/G)
VHF E2 to E12
VHF Italian channel A to H
UHF E21 to E69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
RF output signal
UHF channels 21 to 69
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP: PAL 23.39 mm/s (recording/playback)
NTSC* 1 33.35 mm/s (playback only)
LP* 2 :PAL 11.70 mm/s (recording/playback)
NTSC 16.67 mm/s (playback only)
EP* 2 :NTSC 11.12 mm/s (playback only)
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Fast-forward and rewind time
Approx. 3 min. (with E180 tape)
Inputs and outputs
i LINE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
DECODER/t LINE-2 IN (SLV-SE250D/P, SX250D,
SE450D/P)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
DECODER/t LINE-3 IN (SLV-SE300D1/D2, SE480D)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
LINE-2 IN (SLV-SE300D1/D2, SE480D)
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jack (1)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
18 W
Operating temperature
5
°
C to 40
°
C
Storage temperature
–20
°
C to 60
°
C
Dimensions
Approx. 355 Ч 96 Ч 285 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 3.6 kg
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to change without
notice.
* 1 SLV-SE100A1/A2 cannot play NTSC-recorded tapes.
* 2 not available on SLV-SE100A1/A2 and SE200V1/V2