ZyXEL Communications ES-108A User Manual

User’s guide

Advertising
background image

ES-105A/108A

Ethernet Switch

User’s Guide

Version 2.00

5/2005

Introduction

The switch is a multi-port switch that can be used to build high-
performance switched networks. The switch is a store-and-forward
device that offers low latency for high-speed networking.

Standalone Workgroup Application
The switch can be used as a standalone switch to which computers,
servers and a printer are directly connected to form a small
workgroup.

Hardware Installation

The switch is suitable for an office environment where it can be
placed on a desktop.

1 Make sure the switch is clean and dry.
2 Set the switch on a smooth, leveled and sturdy flat space strong

enough to support the weight of the switch and the connected
cables. Make sure there is a power outlet nearby.

Rear Panel Connection

The RJ-45 ports and the power port are located on the rear panel.

RJ-45 Auto-negotiating Ports
The 10Base-T/100Base-TX RJ-45 ports are auto-negotiating and
auto-crossover

.

An auto-negotiating port can detect and adjust to the optimum
Ethernet speed (10/100Mpbs) and duplex mode (full duplex or half
duplex) of the connected device.
An auto-crossover (auto-MDI/MDI-X) port automatically works with a
straight-through or crossover Ethernet cable.

Quality of Service (QoS)
QoS ensures bandwith-sensitive traffic such as real-time video and
VoIP (Voice over IP) get sent first. Connect devices such as an STB
(Set Top Box) or VoIP phone to a port that supports QoS as labelled.

Power
Use the supplied power cable to connect your switch to a power
source.

LEDs

The following table describes the LEDs.

Product Specifications

Einführung

Der ES-105A/108A ist ein Multi – Port Switch, für den Aufbau eines
Netzwerkes mit hoher Performance. Er ist ein Speicher- und
Übermittlungsgerät mit niedriger Verzögerungszeit für High – Speed
Netzwerke. Dieser Switch wurde für das Kleinbüro, bzw. Heimbüro
entwickelt.

Standalone Workgroup Anwendung
Dieser Switch kann als allein stehendes Gerät direkt mit mehreren
Computern, Servern und Printservern zu einer kleinen Arbeitsgruppe
verbunden werden.

Installation der Hardware

Dieser Switch eignet sich für die Büroumgebung, wo er z.B. auf
einem Schreibtisch platziert werden kann.

1 Der Standort des Switch muss sauber und trocken sein.
2 Stellen Sie den Switch auf eine ebene und stabile Fläche, die

das Gewicht des Switch und der Verbindungskabel tragen kann.
Sorgen Sie dafür, dass ein Stromanschluss in der Nähe ist.

Rückwand Anschlüsse

Die RJ-45 Ports und die Stromanschlussbuchse befinden sich an der
Rückwand des Switches.

RJ-45 Auto-Negotiating Ports
Der ES-105A enthält fünf 10Base-T/100Base-TX RJ-45 Ports. Der
ES-108A enthält acht 10Base-T/100Base-TX RJ-45 Ports.
Diese Ports unterstützen Auto-MDI/MDX, welches eine Verwendung
von Cross-Over Kabeln überflüssig macht.
Die Auto-Sensing Funktion erkennt und justiert die optimale
Geschwindigkeit (10/100 Mbps) und den Duplex Modus des
angeschlossenen Netzwerkgerätes automatisch. Dies erleichtert die
Installation des Switches erheblich.
Vergewissern Sie sich, dass die Kabellängen zwischen den
Verbindungen nicht mehr als 100 Meter betragen.

Quality of Service (QoS)
QoS stellt sicher, dass solcher Datenverkehr, der stark von der
Bandbreite abhängt (z.B. Echtzeitvideo oder VoIP (Voice over IP))
zuerst gesendet wird. Schließen Sie Geräte wie Set-Top-Boxen oder
VoIP-Telefone an Ports an, die mit QoS gekennzeichnet sind.

Stromanschluss
Verwenden Sie den mitgelieferten Stromadapter, um den Switch mit
dem Stromnetz zu verbinden. Zusätzliche Informationen finden Sie
auf dem Etikett des Stromadapters.

Frontplatten-LEDs

Die LEDs an der Frontplatte zeigen den Echtzeit-Staus des Switchs
an.

Produktspezifikationen

Familiarización con el Switch

El switch es un conmutador multi puerto que se puede usar para
construir redes conmutadas de alto rendimiento. El switch es un
dispositivo store-and-forward que ofrece una baja latencia para redes
de alta velocidad.

Aplicaciones para un solo grupo de trabajo
El switch puede usarse para un solo grupo de trabajo, al cual se
conectan directamente estaciones de trabajo, servidores y servidores
de impresión.

Instalación del Hardware

El switch está indicado para entornos de oficina, donde puedan
conectarse los PCs.

Instalación de sobremesa

1 Asegúrese de que el switch está limpio y seco.
2 Coloque el switch en un espacio liso, nivelado y firme, lo

suficientemente fuerto como para aguantar el peso del switch y
los cables que conecte. Asegúrese de que tiene una toma de
corriente no muy lejos.

Conexiones del panel trasero

Los puertos RJ-45 y el de alimentación están localizados en el panel
trasero del switch.

Autonegociación en puertos RJ-45
Los puertos 10Base-T/100Base-TX RJ-45 son de negociación y
cruce automáticos.

Un puerto con autonegociación puede detectar y ajustarse a la
velocidad Ethernet (10/100Mbps) y al modo de transferencia (full
dúplex o half dúplex) del dispositivo conectado. Un puerto con
soporte de auto-crossover (auto-MDI/MDI-X) va a funcionar
correctamente tanto con un cable Ethernet recto como cruzado.

Calidad de Servicio (QoS)
QoS se encarga de que el tráfico sensible al ancho de banda como
vìdeo a tiempo real y VoIP (voz sobre IP) se envìe primero. Conecte
dispositivos como STB (Set Top Box - decodificador) o telèfono VoIP
a un puerto que soporte QoS etiquetado.

Conexión de alimentación
Use el adaptador de corriente sumnistrado para conectar su switch a
la toma de corriente.

LEDs de Panel Frontal

Los LEDs del panel frontal indican el estado del switch en tiempo
real.

Especificaciones de producto

Introduction

Ce Switch multi port est utilisé pour augmenter les performances du
réseau. Le switch a un dispositif d’enregistrement des transferts qui
permet des temps de réponses faibles pour les réseaux à grandes
vitesses.

Application pour groupe de travail autonome
Le Switch est utilisé pour connecter des stations de travail, des
serveurs, et des serveurs d’impression entre eux pour former un
groupe de travail.

Installation

Le switch est approprié pour un environnement de bureau, il peut
être posé sur un bureau ou une étagère.

1 Installez le switch sur un endroit propre et sec..
2 Placez le switch sur un endroit suffisamment solide pour

supporter le poids du Switch et des câbles connectés. Assurez-
vous qu’il y ait une prise électrique à proximité.

Connexion du panneau arrière

Les ports RJ-45 et le connecteur “Power” se trouvent sur la face
arrière du switch.

Ports RJ-45 à négociation automatique
Les ports 10Base-T/100Base-TX RJ-45 sont en auto-nègociation et
en croisement auto.
Un port à négociation automatique peut détecter et ajuster sa vitesse
à la vitesse Ethernet optimale (10/100Mbps) et au mode duplex (full
duplex ou half duplex) de l'appareil connecté.
Un port auto-crossover ou à croisement automatique (auto MDI/MDI-
X) fonctionne automatiquement avec un câble Ehternet droit ou un
câble croisé.

Qualitè de service (QoS)
QoS assure un trafic respectant la bande passante de sorte que la
vidèo en temps rèel et VoIP (Voix sur IP) soient d'abord envoyès.
Connectez des pèriphèriques tels qu'un STB (Boótier de dècodeur)
ou tèlèphone VoIP à un port prenant en charge QoS comme indiquè.

Connexion de l'alimentation
Utilisez le transformateur fourni pour relier votre switch au réseau
électrique.

Voyants DEL du panneau avant

Les voyants DEL sur le panneau avant indiquent l'état en temps réel
du commutateur.

Spécifications du produit

Introduzione

ES-108P sono switch a 8 porte sviluppati per realizzare reti ad alte
performance. Si tratta di periferiche store and forward che offrono
uno scambio dati molto veloce con un tempo di ritardo minimo.

Applicazioni per Workgroup
Lo Switch può essere usato come concentratore fra computer, server
e print server connessi fra loro e facenti quindi parte di una piccola
rete.

Hardware Installazione

Le dimensioni dello switch lo rendono adatto all’installazione in
ambienti domestici o in uffici.

1 Assicurarsi che sullo switch non vi siano tracce d’umidità.
2 Posizionare lo switch su uno spazio piano regolare, livellato e

robusto, abbastanza solido da sostenere il peso dello switch
stesso e dei cavi collegati. Assicurarsi che ci sia una presa di
corrente nelle vicinanze.

ENGLISH

Do NOT block the ventilation holes.

Make sure the cable length between connections does not exceed
100 meters (328 feet).

LED

STATUS

DESCRIPTION

PWR

On

The switch is on and receiving power.

Off

The switch is not receiving power.

LINK/
ACT

On

The port is connected to an Ethernet network.

Blinking

The port is receiving or transmitting data.

Off

The port is not connected to an Ethernet network.

Ethernet
Standard

IEEE802.3 10BASE-T Ethernet
IEEE802.3u 100BASE-TX Fast Ethernet
ANSI/IEEE802.3 Auto-negotiation
IEEE802.3x Flow Control

Protocol CSMA/CD
Technology

Store-and-Forward switching architecture
Supports broadcast storm control

QoS

ES-105A: 2 ports
ES-108A: 3 ports

Non-blocking
Wire Speed

ES-105A: 1 Gb
ES-108A: 1.6 Gb

Transfer Rate

Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex), 200Mbps (full
duplex)

Data Forwarding
Rate

14880 pps for 10Base-T (Ethernet)
148800 pps for 100Base-T (Fast Ethernet)

Connector

RJ-45; Auto-MDIX on all ports

MAC Address

1K MAC address table

Memory Buffer

ES-105A: 64 KB
ES-108A: 96 KB

Network Cable

10BASE-T: 100

Ω 2-pair UTP/STP Cat. 3, 4, 5

100BASE-TX: 100

Ω 2-pair UTP/STP Cat. 5

LED

Per port: LINK/ACT
Per unit: PWR

Power Supply

5VDC 0.6A

Temperature

Operating: 0º C~ 50º C (32º F ~ 122º F)

Humidity

Operating: 10% ~ 90% (Non-condensing)

Dimension
L x W x H (mm)

ES-105A: 121 x 75 x 26
ES-108A: 154.5 x 85 x 26

EMI & Safety

FCC Class B, CE, C-Tick

DEUTSCH

Verdecken Sie nicht die Ventilationsöffnungen

Vergewissern Sie sich, dass die Kabellängen wischen den
Verbindungen nicht mehr als 100 Meter betragen.

LED

STATUS

DESCRIPTION

PWR

An

Der Switch ist am Strom angeschlossen und
eingeschaltet

Aus

Der Switch ist nicht am Strom angeschlossen.

LINK/
ACT

An

Der Port ist mit dem Ethernet-Netzwerk verbunden.

Aus

Der Port ist nicht mit dem Ethernet-Netzwerk verbunden.

Blinkend

Der Port empfängt/sendet Daten.

Standard

IEEE 802.3 10BASE-T Ethernet,
IEEE 802.3u 100BASE-TX Fast Ethernet
ANSI/IEEE802.3 Auto-negotiation
IEEE802.3x Flow Control und Back-pressure

Protokoll

CSMA/CD

Technologie

Store-and-Forward switching-Architektur

Transferrate

14.880 pps bei 10 Mbps
148.800 pps bei 100 Mbps

QoS

ES-105A: 2 ports
ES-108A: 3 ports

Übertragungsrate

Ethernet: 10 Mbps (Halbduplex), 20 Mbps (Vollduplex)
Fast Ethernet: 100 Mbps (Halbduplex), 200 Mbps
(Vollduplex)

Anschluss

RJ-45; Auto-MDIX an allen Ports

MAC-Adresse

1K Mac-Adresstabelle

Speicherpuffer

ES-105A: 64 KB
ES-108A: 96 KB

Netzwerkkabel
(bis 100 m)

10BASE-T: 100

Ω 2-adrig UTP / STP Cat. 3, 4, 5

100BASE-TX: 100

Ω 2-adrig UTP / STP Cat. 5

LED

Pro Port: LINK/ACT
Pro Gerät: PWR

Stromversorgung

5VDC 0.6A

Betriebstemperatur

0º C~ 50º C (32º F ~ 122º F)

Betriebsluftfeuchtigkeit 10 % ~ 90 % (nicht kondensierend)
Abmessungen
L x B x H (mm)

ES-105A: 121 x 75 x 26
ES-108A: 154.5 x 85 x 26

EMI & Sicherheit

FCC Class B, CE, C-Tick

ESPAÑOL

No obstaculice los agujeros de ventilación.

Asegúrese de que la longitud de sus cables no supera los 100 metros
entre sus dos extremos.

LED

ESTADO

DESCRIPCIÓN

PWR

On

El switch está encendido y recibiendo alimentación.

Off

El switch no recibe alimentación.

LK/ACT

On

El puerto está conectado a la red Ethernet.

Off

El puerto no está conectado a la red Ethernet.

Parpadea

El puerto está recibiendo o enviando datos.

Estándar

IEEE 802.3 10BASE-T Ethernet,
IEEE 802.3u 100BASE-TX Fast Ethernet
ANSI/IEEE802.3 Auto-negotiation
IEEE 802.3x Control de flujo y presión posterior

Protocolo

CSMA/CD

Tecnología

Arquitectura Store-and-Forward

QoS

ES-105A: 2 puertos
ES-108A: 3 puertos

Velocidad de
transferencia

14,880 pps para 10Mbps
148,800 pps para 100Mbps

Tasa de
transferencia

Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
Fast Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)

Conector

RJ-45 ; Auto-MDIX en todos los puertos

Dirección MAC

Tabla de direcciones Mac de 1K

Búfer de memoria

ES-105A: 64 KB
ES-108A: 96 KB

Cable de red
(Hasta 100m o
328ft)

10BASE-T: 100

Ω 2 pares UTP/STP. 3, 4, 5

100BASE-TX: 100

Ω 2 pares UTP/STP. 5

LED

Por puerto: LINK/ACT
Por unidad: PWR

Fuente de
alimentación

5VDC 0.6A

Temperatura

de funcionamiento: 0º C~ 50º C (32º F ~ 122º F)

Humedad (Sin
condensación)

de funcionamiento: 10% ~ 90%

Dimensiones
L x A x H (mm)

ES-105A: 121 x 75 x 26
ES-108A: 154.5 x 85 x 26

EMI y Seguridad

FCC Class B, CE, C-Tick

FRANÇAIS

NE PAS OBSTRUER LES GRILLES DE VENTILATION

ASSUREZ VOUS QUE LA LONGUEUR DES CABLES N’EXCEDE
PAS 100 METRES

LED

ETAT

DESCRIPTION

PWR

On

Le switch est démarré et correctement alimenté

Off

Le switch est éteint ou n’est pas alimenté

LINK/
ACT

On

Le port est connecté au réseau Ethernet

Off

Le port n’est pas connecté au réseau Ethernet

Clignotant

Le port reçoit ou transmet des données

Norme

IEEE 802.3 10BASE-T Ethernet,
IEEE 802.3u 100BASE-TX Fast Ethernet
ANSI/IEEE802.3 Auto-negotiation
IEEE 802.3x Flow Control and Back-pressure

Protocole

CSMA/CD

Technologie

Architecture de commutation stockage et
retransmission

QoS

ES-105A: 2 ports
ES-108A: 3 ports

Taux de transfert

14,880 pps pour 10Mbps
148,800 pps pour 100Mbps

Vitesse de transfert

Ethernet : 10Mbps (half duplex), 20Mbps (full duplex)
Fast Ethernet : 100 Mbps (half duplex), 200Mbps (full
duplex)

Connecteur

RJ-45 ; Auto-MDIX sur tous les ports

Adresse MAC

Table d'adresses 1K Mac

Tampon mémoire

ES-105A: 64 KB
ES-108A: 96 KB

Câble réseau
(Jusqu'à 100m ou 328
pieds)

10BASE-T : 100

Ω 2-paires UTP/STP Cat. 3, 4, 5

100BASE-TX : 100

Ω 2-paires UTP/STP Cat. 5

Voyant DEL

Par port: LINK/ACT
Par unité: PWR

Alimentation électrique 5VDC 0.6A
Température

De fonctionnement: 0º C~ 50º C (32º F ~ 122º F)

Humidité (Sans
condensation)

En fonctionnement: 10% ~ 90%

Dimensions

194 x 85 x 25 mm (Long x Larg x Haut)

EMI & Sécurité

FCC Class B, CE, C-Tick

ITALIANO

Non ostruire i fori per la ventilazione.

Advertising
This manual is related to the following products:
Table of contents