P. 32 – Yamaha RX-V461 User Manual

Page 36

Advertising
background image

32

En

Playback

■ Enjoying pure hi-fi stereo sound

The DIRECT STEREO mode allows sources to bypass the
decoders and DSP processors of this unit so that you can
enjoy pure hi-fi sound from 2-channel PCM and analog
sources.

Press C

DIRECT STEREO (or set the operation

mode selector (

K) to

AMP and then press

T

DIRECT ST.) to select “DIRECT STEREO”.

• To avoid unexpected noise, do not play CDs encoded in DTS

when the DIRECT STEREO mode is selected.

• When multi-channel signals (Dolby Digital and DTS) are input,

this unit automatically switches to the corresponding analog
input.

• No sound will be output from the subwoofer.
• “TONE CONTROL” (see page 30) and “SOUND MENU” (see

page 51) settings (except for speaker level settings) are not
effective.

• The front panel display automatically dims.

■ Adjusting the tonal quality

Press 0

TONE CONTROL repeatedly to select

“BASS” or “TREBLE” and then press
A

PROGRAM l / h to adjust the corresponding

frequency response level.
• Select “BASS” to adjust the low-frequency response.
• Select “TREBLE” to adjust the high-frequency

response.

• Speaker and headphone adjustments are stored independently.
• If you increase or decrease the high-frequency or low-frequency

sound to an extreme level, the tonal quality of the surround
speakers may not match that of the front left and right speakers.

■ Adjusting speaker levels during

playback

You can adjust the output level of each speaker while
listening to a music source.

This operation will override the level adjustments made in
“AUTO SETUP” (see page 22) and “SP LEVEL” (see page 53).

1

Set the operation mode selector (K) to

AMP

and then press C

LEVEL repeatedly to

select the speaker you want to adjust.

y

Once you press CLEVEL on the remote control, you can
also select the speaker by pressing Dk / n.

2

Press Dl / h on the remote control to
adjust the speaker output level.
The control range is from +10 dB to –10 dB.

y

You can press 4 A/B/C/D/E to select a speaker and then 5
PRESET/TUNING/CH l / hto adjust the speaker output level.

Notes

Notes

Note

Display

Adjusted speaker

FRONT L

Front left speaker

FRONT R

Front right speaker

CENTER

Center speaker

SUR.L

Surround left speaker

SUR.R

Surround right speaker

SWFR

Subwoofer

Advertising