Zenoah BT250 - Manual (Page 17)

9. Maintenance
Maintenance, replacement, or repair of the emission control device and systems may be
performed by any non-road engine repair establishment or individual.
• Always be sure to stop the engine before inspecting the brushcutter for problems or
performing maintenance.
• Never alter the brushcutter or take the engine apart.
• When replacing parts, always be sure to use only KOMATSU ZENOAH products or
products which have been certified by KOMATSU ZENOAH for use with the KOMATSU
ZENOAH brushcutter.
• Things to check before using brushcutter.
■ REFILLING TRIMMING LINE
WARNING
1 4 6
2 5 7
3
7.6m
(25')
3.8m
(12.5')
Ø2.4mm
0.095In
17 