X10 Wireless Technology VR36A - Manual (Page 2)

3 33 33 2 22 22
2.4 GHz Video
Antenna
Video Out Jack
Power Supply
Jack
2.4 GHz
Channel Switch
C
ONTROLS AND
C
ONNECTIONS
ON-OFF Switch
FCC C AUTION
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
This equipment generates and uses radio frequency energy, and if not installed and used
properly, that is, in strict accordance with the manufacturers instructions, it may cause
interference to radio and television reception. It has been type tested and found to comply
with the limits for remote control devices in accordance with the specifications in Sub-Parts
B and C of Part 15 of FCC Rules, which are designed to provide reasonable protection
against such interference in a residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
interference to radio or television reception, which can be determined by unplugging the
equipment, try to correct the interference by one or more of the following measures.
• Reorient the antenna of the radio/TV experiencing the interference.
• Relocate the equipment with respect to the radio/TV.
• Move the equipment away from the radio/TV.
• Plug the equipment into an outlet on a different electrical circuit from the radio/TV
experiencing the interference.
• If necessary, consult your local Dealer for additional suggestions.
NOTE: Modifications to this product will void the user's authority to operate this
equipment.
I
NTRODUCTION
The VR36A Video Receiver works with X10's Wireless Cameras. The
Camera converts video into wireless radio frequency (RF) signals and
transmits them (even through walls) to the Video Receiver which you
connect to a TV anywhere in your home (up to 100 ft. away from the
Camera). The Video Receiver converts the signals back to video signals
which are fed through a cable to your TV's Video input jack. If you
purchase additional VR36As you can view your camera(s) on more than
one TV.