Xerox EXP 4110 - Manual

Title
Booklets for DocuSP EXP 4110
Date
May 2007
Product
Xerox 4110 / 4590 Copier Printer
“How Do I?” guide for Operators
Page 1 of 1
EXP4110
How to create a booklet (no covers) printing thru the EXP4110
This setup is when you have multiple 8.5x11 pages in the document & you want to create a booklet on 11x17 (no
covers).
1. Select
[File| [Print]
2. Select the [EXP4110 PS printer]
Make sure in the print dialog screen that the [Choose Paper Source by PDF Page Size] is NOT selected.
3. Select [Properties] expand the [Paper Source] Tab
4. Select [Letter SEF] in Page Size
5. Scroll down to [Print Size]
6. Select
11x17
7. Scroll down the Finishing Tab & expand the Tab
8. Scroll down to [Booklet Maker]
9. Select
[Saddle]
A conflict window will popup stating that it has to change duplex to top-top & page order to reverse.
10. Select OK
11. Scroll down to [Folding]
12. Select [Booklet Fold & Staple]
13. Select [OK] [OK] to Print
How to Program 5.5 x 8.5 PDF to 8.5 x 11 Booklets - EXP4110
Per EFI, use the Workflow described below to program a 5.5x8.5 (Statement stock) PDF job to print onto 8.5x11
Booklets:
1. Open the PDF
2. Select
[File] [Print] [EXP4110 printer]
3. Check the [Choose Paper Source by PDF page size]
4. Select
[Properties]
5. Ensure that the [Page Size] = 5.5x8.5 (Statement) SEF
6. Select [Paper Source] and set - [Print Size] = Letter SEF
7. Select
[Finishing] and set the following:
a. [Booklet Maker] = Saddle (approve the programming conflict resolutions)
b. Deselect
[Booklet Best Fit] ***IMPORTANT***
c. [Folding] = Booklet fold and staple (approve the programming conflict resolution)
8. Select [OK] [OK] to submit the job to print
RESULTS: Job prints with the 5.5x8.5 image correctly placed on each half of the 8.5x11 SEF sheet. It is folded
and stapled into a booklet.